AV Rollout Case Study for 12 Meeting Rooms

This AV rollout case study shows how to standardize meeting rooms, control costs, and support users across a multi-site deployment for IT teams today.
AV Rollout Case Study for 12 Meeting Rooms

A 12-room AV rollout can go off track long before the first display is mounted. The usual cause is not a lack of products. It is treating every room as a separate purchase instead of a repeatable workplace technology standard. This AV rollout case study follows a representative multi-site business deployment and shows the decisions that kept procurement, installation, and user adoption on track.

The organization had offices in three locations, a mix of huddle spaces, standard meeting rooms, and two executive boardrooms. Its existing rooms were inconsistent: some relied on personal laptops and USB cameras, others used aging room systems, and a few had large displays with no reliable audio path. Employees arrived early to meetings to troubleshoot. IT spent too much time handling preventable support tickets.

The goal was straightforward: give staff a familiar way to join Microsoft Teams and Zoom meetings in every room, while giving IT a manageable support model and procurement a controlled, transparent budget.

AV Rollout Case Study: Start With Room Types, Not Products

The first useful decision was to stop discussing individual cameras, screens, and speakerphones in isolation. The project team created three room categories based on capacity, furniture layout, daylight, acoustic conditions, and the type of meetings held there.

Small rooms for two to four people needed an all-in-one video bar, a 55-inch commercial display, and a simple touch controller or meeting-room console. The priority was speed: walk in, tap to join, and start the meeting without connecting several cables.

Medium rooms for six to 10 people required wider camera coverage, stronger microphones, and 65-inch displays. In these rooms, camera framing and voice pickup mattered more than adding features employees would not use. A meeting bar with intelligent framing could work well, but only if the room depth and seating layout suited its field of view.

The two boardrooms required a different design. A single soundbar would not reliably cover a long table, and a standard camera might not give remote participants a clear view of the active speaker. These rooms used a larger commercial display, a dedicated conferencing camera, table microphones, speakers, and a room compute solution. The higher equipment cost was justified because executive meetings, client presentations, and hybrid workshops depended on these spaces working every time.

This approach prevented a common AV purchasing error: buying the same kit for every room because it appears to simplify procurement. Standardization is valuable, but identical equipment is not always standardization. The better standard is a consistent user experience built on room-appropriate hardware.

The Discovery Work That Protected the Budget

Before the final quote was issued, the implementation team completed a room-by-room survey. That included wall construction, available power, data outlets, cable pathways, display mounting positions, lighting, Wi-Fi performance, and furniture dimensions.

Several findings changed the original equipment plan. One small room had a glass wall behind the display location, which meant a standard wall mount was not possible without additional structural work. Another room had strong afternoon glare, making its proposed display size and brightness inadequate. A boardroom had a table that was too long for the proposed USB microphone coverage.

These are not minor installation details. They determine whether a system delivers the experience the buyer approved. A camera that technically connects is not necessarily a camera that captures everyone at the table. A display with insufficient brightness may look acceptable in a showroom but fail in a sunlit meeting room.

The survey also identified existing assets worth retaining. Four recently purchased commercial displays met the required specifications and could be reused. That reduced capital cost without creating a mixed user experience, because the new room systems and controllers would remain consistent.

The procurement team received a quote organized by room type, site, and service scope. This made it easier to compare options, approve exceptions, and see where the budget was being spent. It also separated hardware from installation, configuration, freight, and contingency work. That visibility matters when projects involve multiple stakeholders and cost centers.

Choosing the Right Platform and Hardware Mix

The business used Microsoft Teams as its primary platform but regularly hosted Zoom meetings with customers and partners. The team selected Teams Room systems for the spaces that hosted most internal meetings, then confirmed that guest join workflows would meet the organization’s Zoom requirements.

Platform choice should follow actual meeting behavior. A native room solution gives the most controlled experience for organizations committed to one platform, including calendar integration, room management, and familiar join controls. BYOD solutions can be more flexible for mixed-platform environments, but they place more responsibility on the meeting host and often introduce cable or driver issues.

For this rollout, the smaller rooms used integrated video bars to limit installation complexity and reduce visible cabling. Medium rooms used higher-performance bars with better audio coverage. The boardrooms received modular systems with separate camera and microphone components because the room dimensions demanded it.

The project did not select devices on price alone. It compared warranty terms, management capabilities, certification status, available firmware support, and replacement lead times. A lower upfront price can become expensive if the hardware is difficult to monitor, cannot receive platform updates, or must be replaced rather than repaired.

Commercial displays were selected instead of consumer TVs for the meeting spaces because they were intended for frequent business use, had appropriate warranty coverage, and supported the mounting and connectivity requirements of the project. For reception and shared spaces, the same commercial display strategy provided a better base for future digital signage use.

Deployment Without Disrupting the Business

The rollout was scheduled in waves rather than completed all at once. The first wave included one small room, one medium room, and one boardroom. This pilot exposed practical issues before the remaining nine rooms were installed.

In the pilot boardroom, the original camera position produced a poor angle for people sitting at the near end of the table. The installer adjusted the mounting height and tested framing from every seat. In the medium room, the team discovered that a nearby air-conditioning vent affected microphone clarity during video calls. The solution involved repositioning the microphone coverage and adjusting the room layout rather than changing the entire system.

Once the pilot rooms passed testing, the remaining installations were completed by site in planned after-hours windows. Each room was tested for display output, camera framing, microphone pickup, speaker clarity, network connection, calendar visibility, and Teams and Zoom joining. The installation team also labeled ports and documented device serial numbers, room names, network settings, and cable routes.

That documentation is often overlooked, yet it is one of the most valuable project deliverables. When an IT team needs to diagnose a room issue six months later, accurate records reduce investigation time and avoid unnecessary callouts.

Adoption Was Treated as Part of the Rollout

A meeting room is only successful when employees use it confidently. The project team created a short in-room guide with clear instructions for joining a scheduled meeting, sharing content, starting an ad hoc call, and requesting help. The instructions used the same language across all sites.

Staff champions were invited to test rooms before the general launch. Their feedback caught small usability problems that technical testing did not reveal, including a controller placed too far from the room entrance and an unclear wireless sharing prompt. These fixes were simple, but they reduced frustration for everyone who used the room later.

IT also established a clear support path. Users knew whether to contact the service desk, facilities team, or AV provider depending on the issue. The system administrator had access to device management tools for remote health checks, software updates, and alert monitoring.

What This AV Rollout Case Study Proves

The project reached its objectives because it balanced standardization with room-specific design. It reduced the number of different device types, made meeting controls predictable, and gave the IT team a documented environment that could be supported at scale.

There were trade-offs. The boardrooms cost more than a basic video bar deployment, and the pilot extended the timeline slightly. Both decisions prevented more expensive rework after installation. The retained displays also saved money, but only because they were evaluated against the new standard rather than kept automatically.

For organizations planning multiple rooms, the most valuable first step is not adding equipment to a cart. Build a room inventory, define the meeting experience employees need, and verify site conditions before committing to a design. A specialist supplier such as e365 SuperStore can then help align certified conferencing hardware, commercial displays, installation, and support into one accountable rollout plan.

A meeting room should not become a technology test every time someone has a client call. Design the experience once, validate it in a pilot, and repeat it with purpose.

Sign Up For Our Newsletter to Receive Regular Specials!